The Shed: The big sort out continues

The big sort out continues. Since I wrote yesterday’s blog entry I have continued to empty crates and to sort out what I am going to keep, what I am going to pass on to other people (either as gifts or via eBay, and what I am going to have to throw away.

The latter category includes some of the plastic model kits that were stored in the shed. For an as-yet-unknown reason some of the kits that were moulded in very dark grey or black plastic have apparently melted during storage. When I opened the packaging they had been put in, they looked misshapen, and on closer examination some of the larger parts had completely changed shape. What is baffling is the fact that this ‘melting’ has not affected any of the model kits that were moulded in light grey, green, silver, or white plastic.

As it requires quite a reasonable amount of heat to mould the plastic used to make model kits, I can only surmise that these kits were close to a wall of the steel shed when it was exposed to extreme heat at some point during the last ten years. I cannot think of a time when this could have happened, but for the present I cannot come up with another theory that explains the phenomena.

I have not made any particularly notable ‘finds’ today, but I did find several half-built models that need to be completed. Of especial note are three Fujimi Pzkpfw 38(t)s that were at some point in the process of being converted into something approximating to Pzkpfw 35(t)s. The basic hulls and turrets have been built according to the kit’s instructions, but all the running gear has been removed. The turret mantlets have been slightly modified, and the original guns were due to be replaced with cut-down and inverted Airfix 6-pounder anti-tank gun barrels. These are in the same plastic bag as the incomplete model tanks. Also in the bag are several sets of modified ROCO Pzkpfw IV tracks, and as far as I can remember I was going to use these to replicate the style of tracks found on the Pzkpfw 35(t).

I plan to complete these model tanks as soon as I have finished sorting out the contents of the shed, although I think that I will replace the modified ROCO tracks with something that is more akin to those used on the Pzkpfw 35(t).

The side view of a Pzkpfw 38(t).

The side view of a Pzkpfw 35(t).

Advertisements

2 Comments on “The Shed: The big sort out continues”

  1. Stu Rat says:

    I think the black plastic might be a different composition than the others. I have a faint memory of reading/being told that black plastic was toxic if ingested. So that might be why it melted when the others didn't.

  2. Stu Rat,

    Bearing in mind what happened, that would make sense.

    All the best,

    Bob


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s